Allegion
Terms of Use
Privacy Policy
Frequently Asked Questions
Ask your question
Entering your question as a complete sentence will provide more accurate results than keywords or phrases.
User questions
FAQs
Category List
“
are torx screws supplied with anti ligature trim
”
RELATED FAQS
Question
Answer
What is in a 23538838 Tamper Torx Screw Pack for AD-Series Exit Trim?
Resolution:
(2) #10-24 X 1.0 TORX OVAL HEAD MACHINE SCREW, FINISHED (2) SCREW, 8-32 X 3/4 MS PIN TORX (1) SCREW, 8-32 X 1 MS PIN TORX (2) SCREW, 8-32 X 7/8 MS PIN TORX:
What ligature resistant trim is available on the ND or L9000?
Resolution:
High Risk Areas*Patient bedroomIn-suite bathroomIn-suite closetTime-out roomPatient difficult to manage; or risk of solitary and/or unsupervised areas.Medium risk areas*Living roomDining roomGroup ...:
What is the break-away point for the Schlage SL1 ligature resistant trim?
Resolution:
The Schlage SL1 ligature resistant lever is designed to break-away between 100 and 200 inch-pounds. The lever will rotate at this point but not allow access.:
If you order the Von Duprin trim only do you get the screw pack for a 1 3/4" and 2 1/4" door?
Resolution:
All Von Duprin 98 and 99 trims include screws for both 1 3/4" and 2 1/4" thick doors.:
Does the Von Duprin E996L trim require the NL drive screw be installed into the device to function properly?
Resolution:
Von Duprin 98/99 NL drive screw is located in back of the 98/99 center case assembly. NL drive screw should be left in with trim lock slide plate in up position in the 98/99 exit device with E99...: