Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ are hold open closers ADA compliant ”

RELATED FAQS

Resolution: No, LCN does not have an electronic hold open closer (SE/ME Series) that will provide a solid 180° hold open position. The 3130SE has an adjustable hold open position from 85° to 110° maximum. ...:

How do I set the hold open on my 4040 closer?

Resolution: The hold open position on a "REG" or "EDA" hold open arm is set with the door to a few degrees shy of the desired hold open point. To properly set, open the door 5° less then the desired hold open...:

What are Hold Open Closers & Magnets?

Resolution: Hold Open Closers & Magnets (Fire/Life safety products) provide a wide range of solutions. Single or multi-point hold open closers Utilize an electromechanical closer. Hold the door o...:

Is the B500 and B600, B700, B800 thumbturn ADA compliant?

Resolution: The Schlage B500-Series and B600/700/800-Series have ADA compliant turns. See our deadbolt literature under downloads.:

How do you order the L series lock with an ADA thumbturn?

Resolution: Effective December 9, 2019, Schlage L Series mortise locks with a thumbturn will ship standard with our new ADA thumbturn. The new ADA thumbturn is slightly smaller than the existing design w...:

Are the D100 and D200-Series thumbturns ADA compliant?

Resolution: The D100-Series and D200-Series have ADA compliant thumbturns. See the sell sheet stating ADA compliance.: