Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ are Falcon SFIC cores available in Schlage keyways ”

Resolution: For a Schlage "C" keyway: Specify "CP6" as the cylinder suffix when ordering D100 or D200 locks (All other Schlage keyways are not available).:

Will the SFIC mortise housing accept both six and seven pin cores?

Resolution: Yes. Both Schlage and Falcon SFIC mortise housings will accept 6 and 7 pin cores with no additional parts.:

Driver pins on SFIC mortise housings loosen up and fall out.

Resolution: Issue: Schlage SFIC mortise cylinders have potential for the driver pins to fall out affecting the ability to lock and unlock the device.Facts: Housings manufactured between 06/01/2...:

What parts are needed to convert JD to BD on an ND lock?

Resolution: For ND Locks shipping prior to January 30, 2017:The springcage(s), lever, and core driver will need to be changed. Depending on the function the components below are required.Outside spring c...:

How can you tell the difference between the FSIC and SFIC cores?

Resolution: There are several ways to spot differences, see Figure 1, but the easiest is to look at the face of each core. The face of both cores looks like a "figure 8". With small format, bo...:

What parts are shipped with the 80-036 uncombinated SFIC core?

Resolution: Uncombinated cores are furnished less keys, pins and springs. Ordering the 80-036 will get you an empty core so you can key it.:

Can an ND lock with SFIC cores be extended to fit a 3" extended outside door?

Resolution: ND locks can be extended up to 6" Extended Outside. :

Can I get the RU series with a Schlage Full Size Interchangeable core?

Resolution: The RU lock can accept a Schlage Full Size core, but the cylinder suffix must be specified as "J IC-SC" so the correct parts are supplied. The tailpiece will come with the lock. Example: RU581J IC-SC:

Will Schlage make a cylinder in another vendors keyway?

Resolution: Schlage only offers a limited number of keyways that match the BEST sections. Available in keys and cores.Specify keyway using the B suffix: AB = A, BB=B, CB=C, DB = D, DDB=DD, EB = E, FB = F, GB =...:

Is a standard cylinder keyway such as "C" available in SFIC?

Resolution: It is not possible to key SFIC and standard cylinders including Schlage FSIC into the same system. A keyway name may be shared between the two key fami...:

Does Schlage offer restricted SFIC keyways?

Resolution: Schlage Everest B keyways are restricted SFIC keyways.:

Does the Schlage SFIC rim housings accept both 6 and 7 pin IC cores?

Resolution: The Schlage small format interchangeable core rim cylinders 80-329, 80-159, 80-116, and 08-129 can accept 6 pin and 7 pin small format cores.:

How do you order the ND series lock with a small format core?

Resolution: The letters GD, HD, BD, or BDC should be put after the lock function. EXAMPLE: ND53BD GD = Schlage SFIC core HD = Construction core BD = Less core BDC = Plastic temporary construction core:

What is the Falcon restricted keyway process for new end users?

Resolution: A PO from a distributor with a letter of authorization from the end user.:

What keyway comes with the Falcon 19-KIL?

Resolution: The standard cylinder keyway that comes with the 914KIL trim is a Schlage 6 pin "C" section.:

Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ are Falcon SFIC cores available in Schlage keyways ”

RELATED FAQS