Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ Are falcon deadbolts available in weiser keyways ”

RELATED FAQS

What is the FA3 keyway?

Resolution: The FA3 keyway is the ILCO equivalent to a Falcon Conventional G 6-pin keyway.:

What keyway comes with the Falcon 19-KIL?

Resolution: The standard cylinder keyway that comes with the 914KIL trim is a Schlage 6 pin "C" section.:

What is the Falcon restricted keyway process for new end users?

Resolution: A PO from a distributor with a letter of authorization from the end user.:

What is the part number for the lever return spring for the old M series mortise lock?

Resolution: Falcon is reintroducing the lever return spring for the discontinued Falcon M mortise series. Effective November 1, 2014 the lever return spring is now available for purchase with a list pric...:

Are parts still available for the old Falcon M locks?

Resolution: Related solution: What is the part number for the lever return spring for the old M series mortise lock?:

Can I put a Schlage Key-In-Lever cylinder into a Falcon D100 or D200 lock?

Resolution: For a Schlage "C" keyway: Specify "CP6" as the cylinder suffix when ordering D100 or D200 locks (All other Schlage keyways are not available).:

What backsets are available on Schlage and Falcon locks?

Resolution: SCHLAGE locks are available with the following backsets: Lock Series Lock Type ...:

Is a standard cylinder keyway such as "C" available in SFIC?

Resolution: It is not possible to key SFIC and standard cylinders including Schlage FSIC into the same system. A keyway name may be shared between the two key fami...:

Is the new Falcon T Series latch compatible with all available T lock strikes?

Resolution: The new Falcon T-Series latch, introduced mid-June 2013, will work with all available T lock strike options. No changes have been made to the strikes.:

I am unable to remove my key from a B600 B700 B800 deadbolt.

Resolution: This is usually caused because the wrong tailpiece is being used on non-IC cylinders or the incorrect driver for IC options. Use the below descriptions to identify which they need.NON-IC: There are...: