Allegion
Terms of Use
Privacy Policy
Frequently Asked Questions
Ask your question
Entering your question as a complete sentence will provide more accurate results than keywords or phrases.
User questions
FAQs
Category List
“
ANSI mounting hiegth for exit devices?
”
RELATED FAQS
Question
Answer
What BHMA Grade is the Falcon 25 Series exit device?
Resolution:
Falcon 25 series devices are ANSI/BHMA A156.3 Standard for Grade 1 device.References:Falcon 24/25 Series Heavy Duty Touch Bar Exit DeviceCertified Products Directory | BHMA:
Does Von Duprin offer any pulls that through bolt to the Guard-X device?
Resolution:
Von Duprin does not offer any lever trim or pulls that through bolt to the Guard X device. Ives has the 8102-6 and 8105-6 pulls that can be lined up with the mounting screws of the exit device b...:
How do I find ANSI BHMA codes and their meanings?
Resolution:
BHMA provides a certified products directory complete with function codes and meanings. The most up-to-date directory can be accessed through their website at: http://www.buildershardwa...:
What are the ANSI recommendations for the actuator mounting height and distance between the wall actuator and the door opening?
Resolution:
Always check the most current revision of the ANSI A156.19 standard for recommendation or requirement of the location of a Knowing Act switch. 2019 ANSI A156.19 states the requirement of the ...:
Is there a chart that shows which sex bolts are required for mounting the Von Duprin and Falcon/Monarch exit devices?
Resolution:
There is not a chart that shows which sex bolts are required for Falcon/Monarch exit devices. However, this auxiliary catalog list those for Von Duprin: catalog.: