AL with sargent

RELATED FAQS

Question
Answer
The AL lock can not be ordered to accept any competitor full size core.  The ND lock should be used in these applications.
SCHLAGE locks are available with the following backsets: Lock Series Lock Type                 ...
Only the Schlage ND-Series can be prepped to accept non-Schlage cores. All designs are supplied with the appropriate tailpiece Non-Schlage cores are NOT included Lever designs available vary d...
The AL lock will be shipped with two spacers.  Use two spacers for 6-pin cores and use one spacer for 7-pin cores.
The part number for one spacer is D500-000.
The new AL FSIC driver part number is A700-052.  This driver snaps onto the back of the core similar to the ND, as opposed to it being assembled into the lock chassis with a retaining ring.  Th...
This is available, specify 41-005 for an extension link that is used with a 2 3/8" latch to effectively make a 5" backset.
Schlage offers the AL170 single dummy trim, but for applications where a double dummy is needed you can install two AL170 dummy trims back-to-back.  Each AL170 is shipped with a threaded rod (part ...