Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ AL series vesus ND Series ”

RELATED FAQS

Resolution: A lock is any device which prevents access or use by requiring special knowledge or equipment. Mechanical locks are mechanical devices which secure an opening by keeping a door closed until a rel...:

What is the difference between D and ND series?

Resolution: The D series is knob trim and the ND series is lever trim.:

Are ND locks available in 629 or 630 finishes?

Resolution: The AL and ND locks are not available in any stainless steel finishes. The only option is either the 626 satin chrome or 625 bright chrome.:

Is there a tool to drill the thru bolt holes on cylindrical locks?

Resolution: Order the M204-198 thru-bolt jig, see Figure 1. Figure 1: M204-198 thru bolt jig The 40-080 was the old Schlage jig. The 030736-000-70 was the old Falcon jig. When the jig changed to...:

Does Schlage or Falcon offer a backset greater than 5"?

Resolution: Only the Schlage D-knob and ND products are available with an extra long backset. The part number for backsets over 5"-42" is XC03-069, this part will ship as an extension link to b...:

Is there a flat lip option for the ND series?

Resolution: There are two flat lip strike options: Specify XQ02-309 for a 10-013 strike - specify 7/8" Specify XQ07-351 for a 10-025 strike - specify 7/8" :