Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ al series conversion ”

RELATED FAQS

Resolution: The new AL FSIC driver part number is A700-052. This driver snaps onto the back of the core similar to the ND, as opposed to it being assembled into the lock chassis with a retaining ring. Th...:

Did the AL series SFIC lever inserts change?

Resolution: The SFIC lever insert part number prior to 2001 was the A700-022.:

What parts do I need to convert my AL lock to fit a 2" thick door?

Resolution: Part required by function:2 each A700-043 driver & A700-034** lever insert in addition to the chassis parts below:AL10S – 2 hubs A700-028AL25D – 2 hubs 1 A700-028 (inside), 1 A700-030 (outside)...:

AL-Series Plunger Assembly Instructions

Resolution: Changing the plunger assembly on the AL-Series requires disassembling the chassis. Refer to Plunger Assembly Instructions for guidance.:

How do you adjust for door thickness on an AL lock?

Resolution: The standard door range for an AL lock is 1 3/8" to 1 7/8". Using the supplied instruction sheet, align the springcage post to desired door thickness by adjusting the outside castle nut. See inst...:

Why can't a new spring cage or driver be installed on an older AL lock?

Resolution: In 2002 the Schlage AL-Series underwent a design change that affected the spring cage, driver, and plastic insert. Spring cage and driver replacements for AL locks manufactured before this design ...:

What are the part numbers for the new Falcon T latches?

Resolution: Falcon T Lock Latches No Longer Offered With The T Lock Effective mid June 2013 Old Part Number New Part Number &nb...:

I have an old PL series padlock what is the KS replacement?

Resolution: :