AL lever sagging

RELATED FAQS

Question
Answer
Levers may sag due to an incorrectly installed springcage or an incorrect springcage.Mortise locks with a fixed (rigid) lever such as an L9080 will use a spacer on the rigid lever (outside) and a s...
Number of reasons could Von Duprin 55 or 88 series cross bar to sag. Attached are the reasons that could cause the cross bar to sag or not lift. The hinge case spring lifts both lever arms and t...
There was a design change in 2001 for the driver and lever insert on the AL for SFIC products.  Changing the driver and/or lever insert on locks manufactured prior to 2001 will requi...
 The SFIC lever insert part number prior to 2001 was the A700-022.
The AL lock can not be ordered to accept any competitor full size core.  The ND lock should be used in these applications.
 See instructions below.
See Falcon MA lever assembly below: The spring mechanism (E) returns the lever to horizontal.  The parts are not sold separate, so if the lever sags, the entire lever assembly shoul...
Lever assemblies part numbers are found in the Pricebook.  Note they are handed.