Allegion
Terms of Use
Privacy Policy
Frequently Asked Questions
Ask your question
Entering your question as a complete sentence will provide more accurate results than keywords or phrases.
User questions
FAQs
Category List
“
AL lever installation
”
RELATED FAQS
Question
Answer
Can you install a Schlage S lever on an AL lock?
Resolution:
You can not install the S lever onto an AL lock. The AL and S lever trim is not compatible with each other.:
Did the AL series SFIC lever inserts change?
Resolution:
The SFIC lever insert part number prior to 2001 was the A700-022.:
What is the part number for the lever insert on an AL lock manufactured before May 2002?
Resolution:
A700-015, standard cylinder lever insert.:
Can the AL locks be ordered to accept Corbin Russwin core?
Resolution:
The AL lock can not be ordered to accept any competitor full size core. The ND lock should be used in these applications.:
Will an AL lever fit onto an A-series lock?
Resolution:
The AL and A trim is not compatible with each other.:
Are Schlage AL series products handed?
Resolution:
The AL series product line does not use any parts that requires prior knowledge of the door handing. :
What is the AL Jupiter lever return to the door?
Resolution:
1.20 inches:
What is the difference between the standard lever inserts for the pre-2002 AL and the old D Lever?
Resolution:
The old D-Series Lever used a standard lever insert similar to the pre-2002 AL-Series standard lever insert. The old D Lever insert was smaller than the AL and the two were not comp...: