Allegion
Terms of Use
Privacy Policy
Frequently Asked Questions
Ask your question
Entering your question as a complete sentence will provide more accurate results than keywords or phrases.
User questions
FAQs
Category List
“
al driver retainer
”
RELATED FAQS
Question
Answer
New FSIC driver info for the AL locks.
Resolution:
The new AL FSIC driver part number is A700-052. This driver snaps onto the back of the core similar to the ND, as opposed to it being assembled into the lock chassis with a retaining ring. Th...:
What replaced the A700-009 driver?
Resolution:
The A700-009 driver was obsoleted August 2005 and was replaced with the A700-039 driver and A700-041 finished cap.:
Why can't a new spring cage or driver be installed on an older AL lock?
Resolution:
In 2002 the Schlage AL-Series underwent a design change that affected the spring cage, driver, and plastic insert. Spring cage and driver replacements for AL locks manufactured before this design ...:
What is the part number for the SFIC driver on the AL locks?
Resolution:
The small format core throw member for the AL locks is C604-381.:
Did the AL series SFIC lever inserts change?
Resolution:
The SFIC lever insert part number prior to 2001 was the A700-022.:
The key just spins on a B560R B561R or B563R deadbolt.
Resolution:
The Schlage full size interchangeable core (FSIC) prepped B560F, B561F, and B563F deadbolts all require a UL fire cup (R) in order to be UL listed. This fire cup is s...:
Clip on the B500 or D200 SFIC deadbolt comes off shortly after installation.
Resolution:
Verify the door thickness is 1 5/8" or greater per the pricebook. Thin doors will force the clip off the housing. If door thickness is correct then replace the product as needed. ...:
What is the part number for the SFIC tail piece for a W lock?
Resolution:
Q330-168 SFIC Tailpiece (throw member for levers) Q330-169 SFIC Tailpiece (throw member for knobs) :