Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ AL BD throwmember part number ”

RELATED FAQS

Question
Answer
Is the AL series latch adjustable?
The AL series latches are not adjustable.
How do you remove an AL lock from a door?
AL-Series and discontinued D Lever-Series locks use castle nuts to hold the chassis to the spring cages and to keep the chassis positioned in the door. This causes confusion at times when the lock ...
Is there a tool to drill the thru bolt holes on cylindrical locks?
Order the M204-198 thru-bolt jig, see Figure 1. Figure 1: M204-198 thru bolt jig The 40-080 was the old Schlage jig. The 030736-000-70 was the old Falcon jig.  When the jig changed to...
What is the part number of the new plastic castlenut wrench?
The castlenut wrench material was changed from steel to a very strong polymer.  The new part number is 40-017.
What is the part number for the AL SFIC spacers?
The AL lock will be shipped with two spacers.  Use two spacers for 6-pin cores and use one spacer for 7-pin cores.
The part number for one spacer is D500-000.
What is the part number for our AL series electric strike?
Schlage offers the 10-042 Electric strike, 1 1/4" x 4 7/8", 606 and 626 finish only. Related solution: What are the current and voltage requirements of the 10-042 strike?
What is the part number for the SFIC driver on the AL locks?
The small format core throw member for the AL locks is C604-381.
What is the part number for the lever insert on an AL lock manufactured before May 2002?
A700-015, standard cylinder lever insert.