Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ ada thumb turn dimensions ”

Resolution: Effective December 9, 2019, Schlage L Series mortise locks with a thumbturn will ship standard with our new ADA thumbturn. The new ADA thumbturn is slightly smaller than the existing design w...:

How do I get a Size 1 (ADA) closer to close against air pressure?

Resolution: If an Size 1 (ADA) closer is set to 5 lbs. opening force, it will only have about 3 lbs. (60/70%) closing force. If the closer will not close against air pressure, but the ADA requirements have to ...:

Does the 8827 with the 248L-4 strike meet ADA?

Resolution: The 248L-4 strike will not violate ADA. If you change the 248L-4 to the 304L strike, then the latch would need to be lowered.:

What is the minimum clear opening width required by ADA on a single door?

Resolution: The minimum clear opening width for ADA is 32" measured from face of door opened to 90 degrees to face of stop on strike jamb. There must be no hardware mounted to the door projectin...:

Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ ada thumb turn dimensions ”

RELATED FAQS