These cylinders are designed with a microswitch attached to the back of the cylinder. The switch is operated by a cam when the key is rotated.
To order:
XB09-195
Mort...
The XB09-195, XB09-795, and XQ11-804 are basically modified mortise cylinders. The overall length of the mortise cylinder switch is approximately 1-9/16" (1.563"). The diameter of the cylinder face...
Coin turn will need to be on a separate line item, specify 09-487 x length (118, 114, 138).This cylinder coin turn is non-handed so it can rotate freely in both directions.
Standard and Full Size I/C mortise cylinders on the L9485 and L9486, Hotel or Restroom Locks, use the concept of a ward ring to lock out all change keys once the deadbolt is thrown. Instead of a fu...
HANDINGA stop ring is installed on the right side for right hand operation and on the left side for left hand operation. Right hand shown below.
The 20-001 is a conventional mortise cylinder with a straight cam, compression ring and spring for use on rose trim. For use with the L9060 outside cylinder or other straight cam applications.
The Von Duprin CD kit comes with the cover plate machined to accept the cylinder dogging mortise cylinder.1 1/4" mortise cylinder with an inverted straight cam is required for CD option on Von Dupr...
Schlage now offers modular style cams to operate the Falcon MA locks.
The following part numbers are cams for all MA locks (except the MA381):
L583-638 for 1-1/8", 1-3/8", 1-5/8" length cylin...
The "C" indicates small format IC core, which is the only core style Falcon products. The C987 will be provided less core unless -6, or -7 suffix is specified (6 or 7 pin core)
Example:...
Effective July, 2014, there is no longer a specific modular cam part number for dogging. The Schlage modular straight cams come with two mounting holes that allow for the cams to be mounted inverte...
The Sargent cams listed below work for all applications except 16 inside and 50 outside. The equivalent Sargent cam is the 13-0660.
Use the B520-736 for modular cylinder lengths of 1 1/8",...
There are different mortise cylinder length options depending on the cylinder type. Below is a list of available options for conventional, FSIC, and SFIC cylinders, as well as the convent...
Schlage does not have a stainless steel/non-ferrous lock series. The only option that Allegion provides is the Grade 1 cylindrical Falcon X-Series.
To order the Falcon X with the stainless st...
The XL11-800 is an obsolete part number used to designate the ADA thumbturn on the Schlage L9000 series mortise locks.
Current part numbers for the ADA thumbturn for the Schlage L9000 s...
The Levon lever was created to initially satisfy the ADA requirements for locks, but it is too small to fit a cylinder. The equivalent to the Levon lever on our other products is the Rhodes and Sa...
Effective December 9, 2019, Schlage L Series mortise locks with a thumbturn will ship standard with our new ADA thumbturn. The new ADA thumbturn is slightly smaller than
the existing design while s...
Chexit devices shipped after 8-24-2015 with motor driven:
The Chexit device will use a 1 1/4" mortise cylinder with straight cam. Schlage cylinder 20-001-114 recommended.
CAUTION: The length of t...
Chexit devices shipped prior to 8-24-2015:The CX device will need a 1 1/4" mortise cylinder with a straight cam per page 2 of the installation instructions. A 996L-M for a 1 3/4...
The Falcon Monarch 510L and 510L-NL trim will accept either a 1 1/4" Mortise cylinder with a straight cam or a 1 3/8" Mortise cylinder with a straight cam using the blocking ring provided with the ...
The 30-001 is a conventional mortise cylinder with a clover cam, compression ring and spring for use on rose trim.
For use with the L9000 mortise locks except for the L9060 outside cylinder.
Unless otherwise specified on an order, the cam supplied on Falcon mortise cylinders will be the following:
Non-IC mortise cylinder is the 5622-STD.
IC mortise cylinder is the 5622-IC.
Related...
Cams for other applications may be specified with no additional charge, see pricebook.
The Schlage CO-220 is standalone classroom lock down solution with remote fob and visual indicator which allows immediate local lock down by simply pushing the button on the remote fob from anywher...
Installers have reported that their AD-CO Series cylindrical or mortise locks will unlock whenever the outside lever is lifted.
This will occur if the outside spindle (square post) is install...
Key in lever
Falcon cylinders do not work in Schlage locks. The cylinders may fit, but there are no specific tailpieces created to operate any Schlage lock.
SFIC
SFIC is universal so Falcon and...
Hotel cylinder in L9000
As long as the correct cam is used (Schlage clover), a Falcon Hotel cylinder will properly function in an L9486 hotel lock.
When ordering dogging with cylinder; specify complete cylinder with appropriate option below:
XQ11-949 for all conventional cylinders
XQ11-948 for full size and small ...
XQ11-947 was used Classic conventional cylinders prior to the release of modular - NOW OBSOLETE
The 38-070 is a dummy mortise cylinder available in 1 1/8", 1 1/4", 1 3/8", 1 1/2" lengths. The cylinder has an embossed faceplate to look like a standard cylinder but no keyway.
The 38-070 is not available in stainless finishes; 629 and 630.
Von Duprin KR (key removable) mullions requires a 1-1/8" or 1-1/4" mortise cylinder with the standard straight cam, the cam is not inverted. Please see chart below for part numbers.
A 1 1/4" mortise cylinder with straight cam (similar to the Schlage B502-191) or a 1 1/2" mortise cylinder with straight cam using supplied spacer collar.
Cylinder length does not chan...