Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ ada compliant viewer ”

RELATED FAQS

Resolution: The 4040/4040XP closer mountings have the following maximum opening degree templating: The 4040/4040XP PA "Regular Arm" mount will allow for 180° max. opening. The 4040/4040...:

What is the minimum clear opening width required by ADA on a single door?

Resolution: The minimum clear opening width for ADA is 32" measured from face of door opened to 90 degrees to face of stop on strike jamb. There must be no hardware mounted to the door projectin...:

How do I get a Size 1 (ADA) closer to close against air pressure?

Resolution: If an Size 1 (ADA) closer is set to 5 lbs. opening force, it will only have about 3 lbs. (60/70%) closing force. If the closer will not close against air pressure, but the ADA requirements have to ...:

ADA

Resolution: Americans with Disabilities Act:

Are Ives pulls ADA compliant?

Resolution: 8103EZ and 9103EZ have 2 1/2" clearance the other pulls have 1-1/2" clearance. Check with your local code for clearance required.:

Is there an ADA thumbturn offered in the MA locks?

Resolution: Falcon does not offer an "ADA style thumbturn.:

Does the 8827 with the 248L-4 strike meet ADA?

Resolution: The 248L-4 strike will not violate ADA. If you change the 248L-4 to the 304L strike, then the latch would need to be lowered.: