Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ ad series STOREROOM CLASSROOM ”

Resolution: * NOTE: the AD300/400 devices simply communicate the change in Deadbolt Position status to the Host software. The software then decides what action should or should not be taken at the device. :

How do you convert the Von Duprin 370 series controls to NL or night latch function?

Resolution: You must have the Von Duprin NL Cylinder plate part number 967484-89 to convert the 370 series controls from classroom function to night latch function. If new installation, use the NL cylinde...:

What is the Lock Modes/States for Apartment Function?

Resolution: AD Series UI Matrix:

How do I change the function of the Von Duprin 7500 mortise lock from Lever ( classroom ) to NL ( night latch )?

Resolution: To convert the Von Duprin 9975L to 9975NL exit function follow these steps (Note: the mortise lock is shipped as Night Latch from the factory): Turn the NL screw on 7500 mortise lock counter clo...:

What is the difference between the classroom and storeroom functions?

Resolution: ANSI F84 Classroom Lock Outside lever locked and unlocked by key. Inside lever always unlocked for immediate egress. ANSI F86 Storeroom Lock Outside lever fixed. Entra...:

AD changing Function in the field

Resolution: -On the AD series offline locks only you can change the lock function from Classroom/Storeroom to a Privacy, office or apartment function out in the field. - This is done via the HHD/SUS using...:

What is the Multi Point LM9300 Series?

Resolution: MultiPoint locks are three-point locking systems that secure the door at three points – top, bottom, and traditional center latch location. Operating just like traditional locks, MultiPoint locks...:

Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ ad series STOREROOM CLASSROOM ”

RELATED FAQS