Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ Ad battery packs melting ”

RELATED FAQS

Question
Answer
Can I change an AD lock from an 8 "AA" battery pack to a 4 "AA" battery pack?
The AD lock  battery pack type can be changed following this procedure:1. Disconnect the existing battery pack2. Depress and hold the SCHLAGE button for a few seconds to drain off any residual...
What is in a 23538812 Tamper Torx Screws for AD-Series Cylindrical Locks screw pack?
(4) SCREW, TORX, T-15, #8-32 UNC 2A, UNDERCUT, FLAT HD, MACHINE,  1/2" LENGTH (2) SCREW, TORX, T-20, #12-24 UNC 2A, UNDERCUT, FLAT HD, MACHINE,  1/2" LENGTH (2) SCREW, 8-32 X 3/4 MS PIN TORX (1)...
What is in a 23538820 Tamper Torx Screw Pack for AD-Series Mortise Locks?
(2) SCREW, TORX, T-15, #8-32 UNC 2A, UNDERCUT, FLAT HD, MACHINE,  1/4" LENGTH (2) SCREW, TORX, T-20, #12-24 UNC 2A, UNDERCUT, FLAT HD, MACHINE,  1/2" LENGTH (2) SCREW, 8-32 X 3/4 MS PIN TORX (1)...
What is in a 23538838 Tamper Torx Screw Pack for AD-Series Exit Trim?
(2) #10-24 X 1.0  TORX OVAL HEAD MACHINE SCREW, FINISHED (2) SCREW, 8-32 X 3/4 MS PIN TORX (1) SCREW, 8-32 X 1 MS PIN TORX (2) SCREW, 8-32 X 7/8 MS PIN TORX
What current should an AD-Series or CO-Series lockset draw while in its low power "Sleep" mode?
Use a multi-meter in series with the batteries to measure battery current.  Be sure your multi-meter can accurately measure very low current, in the micro-amp range. See the attached Technical Not...