Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ Access code not visible ”

RELATED FAQS

Question
Answer
Schlage Home App Access issues with receiving e-mail confirmation code
Begin by checking  spam folder.  If e-mail not present, have  go to  e-mail program and "whitelist" the following address:  schlage@alerts.allegion.com and re-send request ...
BE479 access codes not showing on screen but still working
Power cycle adapter (unplug from wall for 10-15 seconds), remove battery tray. Reinsert battery tray and plug in adapter. Codes will appear
Using a MTK-15 with an 8 bit burst, do you have to press “#” when done putting in your access code?
This depends on the Access Control Panel, the reader is sending data with every press, so it's up to the Access Control Panel whether it needs the “#” or not.
Isonas Pure Access Cloud and Manager - Two-Factor Authentication Card+PIN
In Pure Access, go to "Settings" and then "Tenant Settings". Under Two Factor settings choose Card/Pin. When adding a Badge credential there will be an option to add a pin to that ...
Why does my AD-200 not accept a new programming code?
Early versions (12/09 ) of the AD200 User Guide in many DEMO kits incorrectly state the Programming sequence to change the a programming code. It shows entering the new programming code o...
CM Lock Manual Programming Disabled
When trying to program a CM lock, it may display an error code with a solid green light and 10 read flashes. This indicates the lock has already been programmed with computer software and manual pr...