Allegion
Terms of Use
Privacy Policy
Frequently Asked Questions
Ask your question
Entering your question as a complete sentence will provide more accurate results than keywords or phrases.
User questions
FAQs
Category List
Schlage Electronics
Question
Answer
380 Power miser replacement
Resolution:
390+ Can replace the old 380 Power Miser with some additional frame prep holes. The aramture should be ok. :
What type of contact is the MBS switch of the 300 series mag lock?
Resolution:
The MBS is a Form A contact NO. SPST - NO = single pole, single throw - normally open The MBS switch when connected to the 300 series circuit board controls a Form C re...:
390PIR Not Locking
Resolution:
Verify adequate voltage and current at the mag lock.390PIR Mag Lock Sys Installation and wiring click "here"Dual Voltage: 12 or 24 volts AC or DC(Selected by jumper setting on PC board)Max. C...:
320+ 350+ 390+ Unit will not bond
Resolution:
check the following:Properly polarized power inputCorrect voltage 12 or 24 VDC Negative - must be on terminal 1 and the Positive + wire must at terminal 2.Power supply has adequate current to ...:
Dynamic Holding Force for Maglocks
Resolution:
The dynamic holding force of a magnetic lock refers to the amount sudden impact force necessary to defeat the magnetic bond of the mag head with the armature. Normal or Static holding f...: