Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

Schlage

What height should a lock or deadbolt be installed?

Resolution: According to ANSI specifications for cylindrical or mortise locks: The lock strike centerline should be 40 5/16" from the bottom of the frame with the lock in relation to the strike.&...:

What finish will the strike and latch be if ordered with a split finish?

Resolution: The door handing determines the finish of the latch and strike. Left reverse and right reverse doors default to outside trimLeft and right hand doors default to inside trimIf lever and ro...:

When was the ME high residential and 505 finish discontinued?

Resolution: The ME trim was discontinued in 2001 and no longer available.:

Does Schlage or Falcon manufacture a stainless steel cylindrical or mortise lock?

Resolution: Schlage does not have a stainless steel/non-ferrous lock series. The only option that Allegion provides is the Grade 1 cylindrical Falcon X-Series. To order the Falcon X with the stainless st...:

Will the residential B60 accept the Commercial Everest or Primus cylinders?

Resolution: The B60 deadbolt with a standard cylinder is not available with Primus. The B60 deadbolt with a Full Size Interchangeable Core could be ordered as B60J, then the Everest or Primus core ...: