Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

Bridges and accessories (ASM/EDK)

Legacy ISONAS ASM and EDK on RC04 Readers

Resolution: No. The data input wiring is different, and the legacy connectors are 5-pin rather than 4-pin for reader connection. :

Are HID IClass SE readers compatible with Isonas?

Resolution: If the reader has a Wiegand output you can use it with the IPBridge controller, and it will work with Isonas.:

Trying to update the firmware in IPBridge, getting error: Update coprocessor 2 error.

Resolution: The IP-Bridge 1.19/1.03 coprocessor firmware (1.03) can be difficult to install. If your IP-Bridge is already at coprocessor version 1.03 it is strongly recommended that you do not attempt to reins...:

How to factory reset the Isonas Advanced Security Modules (ASM)?

Resolution: To reset an Advanced Security Module (ASM) locate the reset pinhole on the same side of the ASM as the two LEDs (one LED is constant red showing 12vDc power and the other will flash green when the ...:

How to install the Isonas Advanced Security Module (ASM) with Fail Safe Locks?

Resolution: When using an Isonas Advanced Security Module (ASM) for a Fail Safe lock and configuring the Access Point in Pure Access, you may need to set the ‘Fail Mode’ in Pure Access Cloud or the ‘Lock Typ...: