Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

LV9000-Series

What power supply do I use with an L9000 electrified L lock?

Resolution: Applies to L9080EL/EU, L9082EL/EU (Discontinued) The Schlage L9080 EU/EL and L9082 EU/EL require 24 VAC/VDC with a peak current of 1.3 Amps at 5 to 10 second intervals and a holding ...:

How do you install an L9000 lock less outside escutcheon trim?

Resolution: "L" Escutcheon trim mounting Although this is NOT recommended, in some instances this may be your only option. You can order 2 each of the L583-287 (L Escutcheon mounting screws for dummy tri...:

Can the Gen2 Indicator be used on a mortise holdback function?

Resolution: You can use the Gen2 Indicator on the L9076 and L9077 holdback functions but the indicator is not sold with the complete lock. You must order a kit as an upgrade and apply to the L9076 or L90...:

Are the electrified mortise locks available with the Vandlgard option?

Resolution: As of 04/03/2020 the following electrified LV9000 locks are available; LV9090, LV9091, LV9092, LV9093, LV9094, LV9095, LV9492, LV9493, LV9494, LV9495. See pricebook for availability and options.:

The Schlage electrified mortise lock motor makes noise when powered but will not lock or unlock after changing the lock handing.

Resolution: When the RX switch on a L9090, L9091, L9092, L9093, L9094, L9095 is handed incorrectly it can cause the outside lever to rotate in the upward motion, but stayed in the locked position when trying t...: