Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

Falcon

Does Schlage supply a full size interchangeable core with tailpieces for the Falcon T and RU locks?

Resolution: IF you are only looking for the Schlage FSIC tailpieces, these can be found in the Falcon price book. See part numbers below.:

RU strike identification for early Corbin Russwin applications.

Resolution: The RU lock can be requested as a retrofit for early Corbin Russwin Unit locks. Several types of strikes are offered depending on the strike conditions but two are very similar with the e...:

Does Falcon have a sample finish ring?

Resolution: SET OF FINISH SAMPLES Part number "20" One (1) of each finish on 1-1/4" diameter disks attached together with a bead chain. Finishes Included: 605, 606, 61...:

How do I change the handing on the RU lock?

Resolution: The RU lock is factory handed for a Left hand or Right hand door. For reverse handing ( Left hand reverse and Right hand reverse doors) see step 9 of the installatio...:

Where can I find timing instructions for the Falcon T lock?

Resolution: To verify the timing on a T561, function test the outside lever after locking it. To lock the key should only rotate 180 degrees (Not 360 degrees as Schlage does) A p...: