Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

Glynn-Johnson

Can I use a 4040SE with a Glynn Johnson 100S?

Resolution: Mounting with GJ90 Series Stop: If the 4040SE is mounted on the"Pull Side" of the door, (requires a 4040SE-18 drop plate). Holes will need to be drilled in the drop plate to clear the GJ900 thru...:

Can you use a Senior Swing with a Glynn Johnson overhead stop?

Resolution: It is not a recommended combination. See below for explanation. The Senior Swing is not set up like any other closer/operator as it truly has an internal dead stop. If the S...:

Can you mount an LCN 4010 with GJ100 series stop?

Resolution: ST-1544 is needed to mount the 4010 door closer and GJ 100 or GJ 410 series concealed overhead stop together.:

What special template (ST) is used with a 4040(XP) Rw/PA mount closer and a GJ overhead stop?

Resolution: The use of a 62A Shoe (required) would be used to mount a 4040XP Parallel Arm with a "SURFACE" GJ 70, 79, 81, 90, or 450 series stop. You would order the 4040XP with a Reg w/62A arm op...:

Can you mount a 4040 Top Jamb with a GJ 100?

Resolution: Yes, you can use the 4041/4040XP in a Top Jamb mount application along with a GJ 100 if you use the 4040XP-18G drop plate for installing the closer. This drop plate has to be used to drop the clos...: