Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

Falcon Commercial

Are the Falcon W series available with a Schlage Full Size Interchangeable core prep?

Resolution: The Falcon W series cannot be ordered with the Full Size Interchangeable Core prep. See below for available cylinder suffix's for the Falcon W series.P Conventional 6-pin cylinder, keyed 5P6 C...:

What is the default when ordering the Falcon T series less Full Size Interchangeable Core?

Resolution: When ordering the Falcon T series less Full Size interchangeable Core, if a manufacturer isn't specified when ordering, the default would be Schlage. :

What are shear pins for in Von Duprin and Falcon Trims?

Resolution: This is a component in many lever trims that is designed to break (shear off) if someone tries to force the lever to rotate when locked.The intent is that if something breaks when the lever is forc...:

What levers for the Falcon MA series has a return of 1/2"?

Resolution: Return to door meets ½" requirement or less for the following levers: Dane, Quantum, Boardwalk and Longitude and Sutro levers.:

How was the Falcon M series lever trim attached?

Resolution: The Falcon M series lever trim was attached using a hex screw (42) to hold the lever (13) in place. The rose and the escutcheon were held in place with a threaded collar (2) that threaded onto the ...: