Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

Von Duprin

What is the part number for the Schlage thumbturn rim cylinder?

Resolution: The rim cylinder with thumbturn, XB11-979 (Figure 1) was designed to be installed on the inside head of the Von Duprin 98/99–2 double cylinder exit devices, see Figure 1. The rim cylinder with...:

What products are available with an antimicrobial finish?

Resolution: DESCRIPTION: The antimicrobial coating is specially formulated to inhibit the growth of bacteria by interrupting cell multiplication. The result is that the silver ions surround bacterial cells, ...:

Why doesn't full rotation of the AD or CO Series Exit Trim (993) outside lever fully retract the Von Duprin 98/99 Exit Device latch?

Resolution: - AD Series and CO series products require that the Night Latch (NL) screw is installed in the exit device. Be sure this screw is installed- Exit hardware and strike must be properly mounted ...:

Is there a kit to install the Von Duprin 9847 on an aluminum door when there is no place to attach the top or bottom latch to the door?

Resolution: Von Duprin does not make a kit to help mount the to top and bottom latches. The aluminum door supplier or the installer will supply this material.:

When were 313AN & 315AN anodized finishes changed to SP313 (695) and 622 powder coat finishes?

Resolution: Beginning December 6, 2010, all 33A, 35A, 98 & 99 devices ordered as 313AN Anodized was furnished in SP313 (dark brown powder coat). All devices ordered as 315AN ...: