Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

Schlage Electronics

How do I communicate with a PED-500 (KC-2) Deadbolt lock using the HHD?

Resolution: When using the SUS and HHD to program the PED-500 deadbolts, please be aware of the following:The PED-500 will only communicate to the SUS if the red programming key has been presented and the unit...:

How do I create a programming fob for the BE367?

Resolution: Remove 9v battery, press and hold down Schlage button while replacing battery, hold till lock beeps, present red programming fob:

What is the difference between programming a CT1000 and a CT5000 in Schlage Express?

Resolution: In Schlage Express, Under Doors setup and configuration, the door Type for the old CT1000 was programmed as a CM/KC-2 lock supporting 1000 credentials maximum. The in newer Schlage Express version ...:

PED-500 First Time Programming Credential enrollment

Resolution: A PED-500 (also known as a BE367 or FE210) that is currently at Factory Defaults (or just out of the box) will require the bolt to be retracted in order for the deadbolt to accept the Program...:

What is the Low Battery level for the BE367 and the FE210?

Resolution: Low Battery indication occurs when the battery is depleted to 6.5 volts. Critical Battery indication occurs at 6.0 volts.: