Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

Schlage Electronics

Adding locks to Legacy PIB-4D- additional locks not recognized.

Resolution: When adding another door to the legacy PIB-4d, You must change the S1 dipswitches 11 & 12 Number Dip11 Dip12 of l...:

Providing Seperate Power To The PIB board

Resolution: When powering a PIB independent of the ACP supply the ground of the supplies must be made common.This ensures a common reference for the weigand output signals. Failure to do so may result in unrel...:

Is the Schlage Utility Software backwards compatible with legacy Schlage products?

Resolution: Supported Devices AD Series Locks AD-200 ...:

wil PIB300 -2D work with VIP

Resolution: The PIB300-2D will work with an older VIP lock as long as the VIP lock has firmware version 2 or 3. The VIP's with firmware version 1 will not work with the PIB300-2D.The PIB m...:

What is the current draw of a CT-5000

Resolution: 500mA at 12 or 24 VDC: