Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

4050 Series

How can I make my regular arm closer mount parallel arm?

Resolution: This can only be done with universal, non-handed closers: 1250, 1260, 1450, 1460, 4030, 4040XP, and 4050A.You would need an xxxx-62PA shoe to adapt from regular arm to parallel arm mount...:

Is the Cush Shoe Support (-30) the same for all of LCN closers?

Resolution: For LCN Cast Iron Closers, the 4050A, and Falcon SC closers it is (1 3/4") wide, (1 1/2") tall and (1 1/2") deep For 1250 and 1450 LCN Alum body Closers it is (2") wide, (1 1/2") tall and (1 1/2"...:

Can you use parts of a kitted Alum series closer (High velocity SKU's) and ship with low velocity SKU's?

Resolution: INTERNAL COMMUNICATION ONLY! After talking with our compliance manager, Matt Phillips, we will not alter kitted Alum series product (high velocity). Once it comes into LCN co...:

What is this blue fluid around the packing nut of an LCN 4050 closer?

Resolution: The Aluminum Closer Project team found some pre production samples of the 4050 closer (some may have gotten out to SSC offices) which had an issue with Packing Nut Leakers which...:

Is there a different PA shoe required when installing a 4050 Delay cylinder in a parallel arm mount?

Resolution: A 4050(A) delay closer requires a different PA shoe which is over an inch longer than the standard PA shoe and is stamped with a DA. This is required for the Delay feature t...: