Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

4040XPT

Is there a 4040xpt DE pull side top jamb mounting available?

Resolution: The 4040XPT does not have any templating standard or special that will allow for a pull side top jamb DE frame application.Depending on the DE frame you may be able to use 4020T x ST 1808. &n...:

Can the 4040XPT DE x ST3073 be used with pivots?

Resolution: This application will work, you would take all measurements from the Centerline of the center or offset pivot.:

What is the part number for the 4040XPT shaft spacer?

Resolution: 4040XPT-61 is the part number for just the shaft spacer. This part can be ordered separately. :

Is there an ST for mounting a 4040XPT pull side with a concealed GJ stop or on a Rabbeted door?

Resolution: When using the 4040XPT mounted pull side with a GJ concealed or on a rabbeted door you would use ST-3182 and the 4040XPT-18G plate (purchased separately) for compatibility between the 4040XPT and c...:

Is there an LCN surface mounted track closer that will swing 180 when mounted on push side of door?

Resolution: There is no surface mounted track closer that can be mounted on the push side of the door that can be templated for 180 degree swing. Will need to go to a pull side mount track closer.: