Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

1450 Series

How can I make my regular arm closer mount parallel arm?

Resolution: This can only be done with universal, non-handed closers: 1250, 1260, 1450, 1460, 4030, 4040XP, and 4050A.You would need an xxxx-62PA shoe to adapt from regular arm to parallel arm mount...:

Is the Cush Shoe Support (-30) the same for all of LCN closers?

Resolution: For LCN Cast Iron Closers, the 4050A, and Falcon SC closers it is (1 3/4") wide, (1 1/2") tall and (1 1/2") deep For 1250 and 1450 LCN Alum body Closers it is (2") wide, (1 1/2") tall and (1 1/2"...:

Can you use parts of a kitted Alum series closer (High velocity SKU's) and ship with low velocity SKU's?

Resolution: INTERNAL COMMUNICATION ONLY! After talking with our compliance manager, Matt Phillips, we will not alter kitted Alum series product (high velocity). Once it comes into LCN co...:

What additional screws are needed when mounting a 1250 or 1450 in a Parallel arm mount with a coordinator?

Resolution: Qty of 5 of DP#72643 – ¼-20 X 12 mm (.472”) Pan Head. The standard screws for the 1250 and 1450 are pan head so these additional screws need to match so they too are pan head. The addi...:

What is the size of the additional screws that are needed for mounting an LCN closer parallel arm with a 1/4" solid weatherstrip?

Resolution: For the 1250 and 1450 closers:Qty of 4 of DP# 71858 – ¼-20 X 25 mm (.984”) Pan HeadQty of 1 of DP# 71853 – ¼-20 X 38 mm (1.496”) Flat Head The standard screws for the 1250 and 1450 are pan hea...: