Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

Schlage Electronics

Resolution: Normal Operating: Red off, green on - Idle, waiting for connection Red off, green blinking - Network connection to serial port established Red blinking, green (Status LED) blin...:

DC-104 HandKey II wiring

Resolution: For RS-422 wiring: DC-104 HK-2 set dipswitch to: wire to: pin: RS-422 ...:

A customer has an ID3D with a bad ethernet and wants to order a field-upgradeable ethernet card. What part number should they use?

Resolution: The EN-100 that is specified for the E-series (ID3D) products is a factory-installed-only option.:

Where on the ID3D HandKey, do you set the IP address if an Ethernet card is installed?

Resolution: The IP address and other network configurations can be found under Password Setup Menu 2 and then "Set Serial" option. There, settings can be found for the IP address, Gateway, Host Bits, and...:

Does switching the time format from 24 hour to 12 hour on an E or F series HandReader, store the time in the same format on the transaction?

Resolution: No, the time is switched back.: