Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

FAQs

Is the Schlage Utility Software backwards compatible with legacy Schlage products?

Resolution: Supported Devices AD Series Locks AD-200 ...:

What is the minimum and maximum reveal for a 9500 Series Senior Swing operator?

Resolution: The 9542, 9553, 9563 surface mounted Senior Swing with a regular arm, mounted on the push side of the door, can handle a reveal from 1 1/8" up to 10". The 9542, 9553, 9563 surface mounted Senior S...:

Can you order the 996 lever only if they want to switch from a #06 design to the # 07 design?

Resolution: You can switch the lever from 06 to 07 design on 996L trim. Order the 050737 for an active lever and 050007 for fixed and specify the finish.:

If using the alarm kit-ALK with the 99 device what power supply is needed?

Resolution: Exit alarm ALK operates with 9VDC battery and doesn't required a power supply.If you choose to hard wire the exit alarm ALK use the PS902 power supply.Exit alarm ALK requires 24VDC regulated power ...:

What took place of the 3140 strike?

Resolution: The Von Duprin 3140 electric strike is discontinued and the direct replacement is 6211 electric strike.:

What is the difference between Von Duprin LX and/or RX switches and the Signal Switch SS option?

Resolution: The RX monitors the push bar while the LX monitors the latch bolt of the exit device. A SS device has an LX and a key cylinder switch plus an emergency push bar signage.:

Is the CS210 adjustable for either a 5 1/2" or 4" door prep?

Resolution: The CS210 has a patented center-to-center adjustment that will switch from the standard 4" door prep to 5-1/2". Only these two dimensions are available.:

Can the 510L trim handing be changed out in the field?

Resolution: Handing can be field changed, see step 3 of the 510L installation instructions.:

Can the AD-200 and CO-200 be manually programmed?

Resolution: Yes. The AD-200 and CO-200 each can be managed through manual direct lock keypad programming or PC software programming using an HHD to transfer programming information to the lock....:

Is the CS210 available with SFIC or FSIC?

Resolution: Schlage is pleased to announce in January 2012 the addition of small format interchangeable core (SFIC) and full size interchangeable core (FSIC) to our CS210 interconnected lock series. Clic...: