Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

FAQs

Are LCN metal covers a ferrous or non ferrous Material?

Resolution: All LCN metal covers are steel which is a Ferrous material. FerrousThese are metals which contain iron. They may have small amounts of other metals or other elements added, to give the ...:

What would cause a Senior Swing to open too far?

Resolution: The Senior Swing operator is designed to power open the door to 90°. The built in dead stop (in the gearbox) prevents it from opening any further. If the Senior Swing operator is opening to far (pa...:

What is the conversion for Monarch BA?

Resolution: In 2007 Monarch part numbers went through a conversion as described below. OLD NEW DESCRIPTION BA EO Exit Only, No Outside Trim DT no change - PULL ONLY DT Dummy T...:

Can the 6111 electric strike be used with Falcon 25R?

Resolution: For the backset see the Falcon (F)25-R template; T-1201 for Metal Door, W-1201 for Wood Door. For Single Doors, the distance from the surface of the raised stop to the Centerline of the device is...:

How do you adjust a door closer?

Resolution: How to: What are the steps to adjust a door closer? Facts: All LCN and FALCON door closers will have 3 regulating valves and a spring adjustment. All cl...:

Why is my latch not retracting when I depress the push pad on an XP98/99 device?

Resolution: Pushing on the push bar or activating the EL/QEL or the trim on Von Duprin XP98/99 exit device does not retract the latch, it releases the latch only. Door must be pushed or pulled when device o...:

What parts are included in the L9000 maintenance kit?

Resolution: The maintenance kit looks like a tackle box containing many service parts for the L9000, see list of components here.:

Is there a cam for a Schlage IC cylinder to operate a Falcon MA lock?

Resolution: The B520-698 cam was designed for a Schlage IC mortise cylinder (see Figure 1) to operate a Falcon MA lock, all functions except the MA381. There is no Schlage cylin...:

Can I get a Senior Swing with a reduced opening force gearbox?

Resolution: The older model Senior Swing came with 2 spring options. The "standard force" spring required 15 lbs of manual opening force, and reduced force "RF" required 11 lbs of manual opening force. All S...:

Why won't my lever retract the latch on an S200?

Resolution: Latch retraction issues at time of installation could be caused by incorrect handing of the lock chassis. Move the driver to one of the following positions as indicated below: :