Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

FAQs

Resolution: Allegion reader with the capability of reading credentials in the 125Khz range. Readers include the PR10. Also refers to "Prox" credentials operating in the 125Khz range.:

What additional screws are needed when mounting a 1250 or 1450 in a Parallel arm mount with a coordinator?

Resolution: Qty of 5 of DP#72643 – ¼-20 X 12 mm (.472”) Pan Head. The standard screws for the 1250 and 1450 are pan head so these additional screws need to match so they too are pan head. The addi...:

What is the size of the additional screws that are needed for mounting an LCN closer parallel arm with a 1/4" solid weatherstrip?

Resolution: For the 1250 and 1450 closers:Qty of 4 of DP# 71858 – ¼-20 X 25 mm (.984”) Pan HeadQty of 1 of DP# 71853 – ¼-20 X 38 mm (1.496”) Flat Head The standard screws for the 1250 and 1450 are pan hea...:

Are the LT levers field reversible?

Resolution: The levers on the LT lock are field reversible.:

What is the 40-116 cylinder loading tool?

Resolution: The 40-116 cylinder loading tool was discontinued in 2015.:

LM9380 won't lock with a key and cylinder.

Resolution: The LM9380 lock is shipped in the locked state BEFORE the cylinder is installed. If required move the turn hub to the locked state then install the cylinder.:

What finish does Schlage recommend for outdoor use?

Resolution: From a BHMA Environmental testing aspect, the following finishes for exterior use are recommended.Best - 629/630 - Bright or Satin Stainless; no top-coat Better - 626/682/625 – Sat...:

Resolution: Lock Prep, Mortise lock Prep for Escutchion Trim; ANSIA115.1, Door Lock Prep:

160

Resolution: Lock Prep, Cylindrical Lock Prep for Knob trim; ANSIA115.2, Door Lock Prep:

161

Resolution: Lock Prep, Cylindrical Lock Prep for Knob trim; ANSIA115.2, Door Lock Prep: