Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

FAQs

What is included in an ND Competitor Tailpiece Kit?

Resolution: Please see here for a list of ND Competitor Tailpiece kit part numbers and parts that will be included. :

Does Falcon have a key punch to cut keys for its standard cylinders?

Resolution: Falcon does not offer a punch to cut keys for its standard cylinders. :

What is length of wire for TW4 Electric Hinge

Resolution: The wire length for the TW4 electric hinge measures 12":

How do I determine the handing of the 10-091 armor strike?

Resolution: The handing of the 10-091 strike can be determined using the illustration below.The 10-091 is only for use with L9175 or L9176 normallyHand the strike based on the active leaf and install it on the...:

Can the 6400 strike be ordered with the LM6400 latchbolt monitor switch?

Resolution: Can the 6400 strike be ordered with the LM6400 latchbolt monitor switch?No. The monitor switch must be purchased separately.The part number for the LM6400 monitor switch is: 24239832 &n...:

Can I change the handing of an RX55DU ?

Resolution: The RX55DU can be re-handed in the field if necessary.Please see this file for instructions. This example shows changing the device from RHR to LHR.:

Falcon MA Series

Resolution: Grade 1 mortise lock:

Is the centercase of the WS99 or WS99 handed?

Resolution: Yes. The windstorm devices WS98 and WS99 center cases must be ordered with Handing from the factory.:

Is the CB1 acceptable on fire doors?

Resolution: According to the Allegion certification team as of Sept 2016:Any product on a fire door should be listed. The CB1 is not listed (as of this writing).Since the UL file does not support the CB1, ...:

Falcon RU Series

Resolution: Grade 1 unit lock: