Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

FAQs

Resolution: The LM9200 is not available to be ordered less top latch, nor can the LM9200 series be used less top latch. :

Is the LCN Alum Series closers available in a plated finish?

Resolution: No. The Alum LCN series of closers, which include the following; 1250, 1450, 1450T, 4050(A), or 4050(A)T are not available in a Plated Finish.:

Can the Schlage L Series 180 degree indicator be manipulated?

Resolution: See complete memo here.Excerpt from memo: With the new 180 degree indicator, recognizing the diversity of application where having the indicator unlock the door would be an issue, the p...:

Can a Von Durpin device have both Safety Glow And Silkscreen?

Resolution: Yes.Von Duprin can do both Safety Glow and Red Silk Screening on the same device. The Red Silk Screening is laid over the top of the Safety Glow.For details or quotes, contact VDI_Specials@A...:

What is the Everest SL cylinder?

Resolution: See web site for a full overview and downloads.Everest 29 SL is a 7 pin full size key in lever (KIL) cylinder that is compatible with a Small Format Interchangeable Core. The SL cylinder ...:

What is included in an ND Competitor Tailpiece Kit?

Resolution: Please see here for a list of ND Competitor Tailpiece kit part numbers and parts that will be included. :

Does Falcon have a key punch to cut keys for its standard cylinders?

Resolution: Falcon does not offer a punch to cut keys for its standard cylinders. :

What is length of wire for TW4 Electric Hinge

Resolution: The wire length for the TW4 electric hinge measures 12":

How do I determine the handing of the 10-091 armor strike?

Resolution: The handing of the 10-091 strike can be determined using the illustration below.The 10-091 is only for use with L9175 or L9176 normallyHand the strike based on the active leaf and install it on the...:

Can the 6400 strike be ordered with the LM6400 latchbolt monitor switch?

Resolution: Can the 6400 strike be ordered with the LM6400 latchbolt monitor switch?No. The monitor switch must be purchased separately.The part number for the LM6400 monitor switch is: 24239832 &n...: