Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

FAQs

What are the dimensions of M400 series Mag locks?

Resolution: Click here to download the PDF :

Is there a dress cover available for the 40/70 series TJ application that covers the whole bracket?

Resolution: This feature is no longer available for the current 40/70 series Magnetic locks.:

Resolution: It comes with 2 keys.:

Will the alarm output on a M490DE change state during 15 second release countdown or after M490DE releases?

Resolution: The Alarm output contact should change state during the 15 second release. It will not change state until after the nuisance delay. :

What is the country of origin for P620009 PC Board Assembly SPDT for a 620 pushbutton?

Resolution: The BAA shows the 620 pushbutton is USA. The PC Board Assembly SPDT would be the same as the whole. Country of Origin is USA.:

Will a 72 series maglock fit on a 2-1/4" door thickness?

Resolution: Yes, the standard 72 comes for 1 3/4" door. You will have to order (2) sex-nuts for 2 1/4" door thickness. Part number P390498-7 The sex-nut is the only door thickness dependent part.:

On the AD-400-MS, the template for wood door shows 3/4" diameter hole, 1-1/2" deep for the DPS. Is it the same for the frame?

Resolution: Yes, the switch and the magnet share about the same depth.:

On the AD400-993R, what does the twisted tailpiece activate on a Vonduprin 99 CVR exit device?

Resolution: The horizontal portion of the rotational cross-hair which is retracting the rods. Needs the Night Latch drive screw installed.:

Does the M400 series mag locks have a UL294 listing ?

Resolution: · The M400 do not have UL294 listing- Power over Ethernet POE:

Does the CO series lock use the same latch as the Cobra locks ?

Resolution: The CO and Cobra latches are not the same: · Co latch part number 13-049 · Cobra latc...: