Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

FAQs

Can the ND rectifier be used with DC voltage?

Resolution: The rectifier can be used with DC voltage when using the Schlage ND12/80/96 EL/EU solenoid driven locks shipped prior to March 14, 2016. The rectifier will just filter and reduce the lin...:

Schlage Express Offline Credential Operational Function Details for use with AD-200, CO-220, CO-200 locks, and CT-5000 controller

Resolution: Here are the Schlage Express Credential Operational Function Details for use with AD-200, CO-220, CO-200 locks, and CT-5000 controller: Schlage Card and Fob types of Proximity and Magn...:

Schlage Express and Vanderbilt SMS Select Offline Credential Function Details for: AD-250, AD-200, CO-250, CO-200, CT-5000

Resolution: Schlage Express and Vanderbilt SMS Select Offline Credential Function Details for: AD-250, AD-200, CO-250, CO-200, CT-5000 (Schlage Express supports: Computer Managed locks: AD-200, CO-200, C...:

Are the L9090, L9091, L9092, L9093, L9094, L9095 electrified mortise functions available with an RX switch to monitor the outside lever?

Resolution: On non-electrified L9000 locks shipping after January 2, 2017 where the RX switch is specified, the RX will trigger only the inside lever. On non-electrified locks shipping prior to January 2,...:

What is a lock function?

Resolution: Apartment Corridor Lock function is defined as a lock where the latch bolt operated by lever from either side, except when outside lever is made inoperative by a stop or mechanical means other than...:

Changing the EL/EU switch on my L9090, L9091, L9092, L9093, L9094, or L9095 does not work.

Resolution: Changing the position of the EL/EU (mode) switch will not take place until after power is applied.EXAMPLE: The lock shipped from the factory in the EL (electrically locked) mode. If the positi...:

If power goes out will my L9090, L9091, L9092, L9093, L9094, L9095 EL remain locked?

Resolution: In the event of a power failure, the EL opening will change state from locked to unlocked. This is due to a large capacitor within the lock. The capacitor always charges up before the motor/d...:

How to manually enroll or read a proximity credential into Schlage Express

Resolution: Proxalator software version 2.4.0 supports these proximity bit formats to allow manual card data conversion to the Encoded ID that can be copied into Schlage Express. 26 Bit ...:

How do I program my device?

Resolution: The programming processes for Allegion devices can be both product and features specific. Some products programming processes are electronic in nature, others are physical in nature. &nb...:

I have 12 red blinking lights when I present a valid credential to my CO220

Resolution: 1st Scenario - Normally the customer will experience the 12 red blinking lights when the lock is in "lockdown" and the reader is presented with a normal credential (the reader will re...: