Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

FAQs

Why does the CM or CL lock get twelve red flashes before unlocking?

Resolution: The CM or CL lock will flash twelve red LED flashes before unlocking, to act as an annoying alert of the batteries becoming too low to function correctly.LOW BATTERY INDICATIONS:- Battery pow...:

How do you test a maglock magnetic pull strength?

Resolution: The magnetic flux per square inch on the magnetic lock face is too small to test magnetic pull strength with a small piece of metal such as a screwdriver. The maglock must be tested by using the ar...:

What is the part # for the LED on a 653 keyswitch?

Resolution: P394381 for Red LED and P394382 for Green LED.:

Can ligature resistant trim be order with standard lever outside and ligature trim inside?

Resolution: Due to ligature guidelines you cannot "mix and match" ligature trim with standard trim. You can pair an SL1 lever with an SK1 kob. Specify both XL11-000 & XL12-482 in the comment...:

What is the connection terminal layout for the 105 PIR maglock?

Resolution: Maglock 105 PIR terminal connection block:1/2 - power 3/4 fire alarm input 5/6 - aux input 7-NO, 8-com alarm output 9-NO, 10-com, 11-NC - DSM output 12-NO, 13-com, 14-NC - MBS output 15/16 - ...:

What is the current replacement for older Locknetics or Schlage Delayed Egress maglocks?

Resolution: Here are the dimensions of previous Delayed Egress maglock products:101+DESingle - 11-1/2”L x 3-1/32”H x 3-3/16”DDouble - 23”L x 3-1/32”H x 3-3/16”DLink to download the 101+ Installation Manual105 ...:

What is the PIB300-2D, PIM400 Current Draw?

Resolution: Current draw for PIB300-2D, and PIM400-TD2, PIM400-485 is 250mA.:

What is the CT5000 / WRI400 Current Draw?

Resolution: The CT-5000 and the WRI-400 may draw 500mA max.:

Can I configure the KP2000 to simultaneously trigger the main and auxillary relay?

Resolution: The Aux relay of the KP2000 does not simultaneously trigger with the main relay by default. To Program KP2000 to simultaneously fire main and aux relay, use the following procedure. 1. Reset Key...:

M400 Series Finish

Resolution: Satin Aluminum finish is 628: