Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

FAQs

How to setup a fire alarm reset for ton 515 power supply

Resolution: see attached documentreset 515 Power Supply:

How do I install a 650 series keyswitch?

Resolution: Installation instructions for the 650 series keyswitch can be found here.:

How do I install a 672 Touchbar

Resolution: 672 Install Guide:

620 Pushbutton datasheet

Resolution: See attached documentwww.schlage.com/support Choose System components Electromagnetic Locks :

Schlage 679-05 - Door Position Switch Installation Manual

Resolution: 679-05 Installation Instructions are available in this document.:

How do I install a 692 touchbar

Resolution: Install Guide 692:

Do AD and CO Series locks support the Yale FSIC 7pin cylinder?

Resolution: There is a new supported competitor Yale 7 pin FSIC removable key cylinder option for AD and CO series locks: Order Exterior Lever (Less Cylinder) - JD YA7 supporting Yale FSIC 7 Pin (Yale 12...:

Does the relock time on the M420P shunt the DPS?

Resolution: No it does not. The DPS and relock time are independent of each other.:

Why won't my 7610 keyfobs work on an AD lock?

Resolution: Why won't my 7610 keyfobs work on an AD lock?Verify that the AD lock reader has been configured to support the proximity credential format. (Select the Schlage Proximity format using the HH...:

Why won't the Yale 7110-SVR or other manufacture types exit devices work with the AD-Series or CO-Series exit trims?

Resolution: - AD-series and CO-series exits use a rotational input to unlock the door, exit devices that require a lifting motion istead of rotational, are NOT compatible with AD-series exit devices.: