Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

FAQs

Does Glynn Johnson still sell the 100A overhead stop?

Resolution: The 100A was discontinued in 1995.:

Will a Von Duprin 3215 mortise cylinder operate in the Von Duprin 98/9975 F device?

Resolution: The 3215 mortise cylinder will operate with 98/9975/F mortise device on a 1 3/4" thick door.:

How does Dynamic Channel Switching (DCS) work on the AD-Series?

Resolution: Setting Dynamic Channel Switching 1) Connect and couple the SUS to the PIM400 you intend to change. See the SUS User Guide for details 2) Under “PIM Properties” and the “Edit” tab is ...:

What is the part number for the 9447 rod retaining clip?

Resolution: Rod retaining clip is available with rod adjustment kit, part number Kit.1001 (quantity of 3).:

My PS914 has power but my 2RS card is not working?

Resolution: Following could cause the 900-2RS board not to operate: If 900-2RS board is not plugged into the PS914 mother board. If PS914 power supply is selected for 12VDC instead of 24VDC. If control co...:

What is the backset of the 99 device when used with a 6111 electric strike?

Resolution: The back set for 98/99 device is 2 7/16" from top of the stop on single door and 3 7/16" on double door with 4854 mullion. See attached templates, dimension B. 6111 Electric Strike Temp...:

Can the 900-4RL board be used for security interlock doors?

Resolution: You can use the 900-4RL board for security interlock doors. Each 900-4RL board provides two door security interlock. :

What operator is best for high traffic automatic use.

Resolution: The Senior Swing 9500 or 2800 series operator is designed to for "High Traffic - High Abuse" areas.:

Why is a bituminous back-coating used?

Resolution: Some architectural specifications require steel frames to be back-coated with a bituminous coating for corrosion protection or sound control. It is commonly specified to be used in condit...:

What would cause the SL1 lever trim to droop?

Resolution: Slight lever droop is normal for the SL1 trim due to the internal safety clutching mechanism that is designed to allow clutching in both directions.: