Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

FAQs

Resolution: With error 96 you can try to warm boot reader. If that fails it may need to be cold booted but that will wipe the users from the reader. If that still fails they can try to purchase a lithium ...:

What is the part number for Handnet for Windows?

Resolution: HN-2-T1 Tier One: Up to 5 HandKeysHN-2-T2 Tier Two: Up to 25 HandKeysHN-2-T3 Tier Three: Unlimited HandKeysThere are also upgrades to the above tiers should the user need it later. The part n...:

What is the part number for the new HandKey II?

Resolution: The part number is HK-2-F3:

What is the part number for a control pin for a 23-030?

Resolution: There are two parts that can be referred to as control pins for a 23-030 (FSIC core).C603-967 is the lower control pin that sits in the seventh hole of the FSIC plug. (part B in exploded view) ...:

Why doesn't a PIN code work when I program a CO200 or AD200 with my HHD?

Resolution: Enable the 12-button keypad option only if using AD and CO locks exclusively. Do not select this if also using CM or KC locks.:

can we use two M490 and make them into a M492

Resolution: Effectively yes, but a coupling block will be required to join the two single mags.P44488377 490/450 DBK - Double Magnet Connector Kit (Screw Mounting Pack Sold Separate) P44488286 420 DBK - D...:

Keypad and Touchpad Programming Guides

Resolution: BE365/FE595/FE575 Programming Guides:To access the programming guide for the BE365, FE595, and FE575, please click here.To download the Programming Guide, please click here. BE375/FE695 Progra...:

What is an RCP or RC1 module?

Resolution: An RCP is a prewired 12/24V rectifier. An RC1 is a prewired rectifier with a filter capacitor. An AC transformer with a rectifier (RCP) or rectifier and filter capacitor (RC1) is not recommended fo...:

PIM COMPATIBILITY

Resolution: No, the AD400 / WRI400/ WPR400 only work with the PIM 400-485 or PIM 400-TD2. The legacy WA locks / WRI / WPR2/ WSM only communicate with the legacy PIM-485 or PIM-TD2.:

why does Schlage express crede bit value of a prox card to 37

Resolution: In older versions when application was opened the card bit format selector would would initially be on 37 bit. This was due to coding that populated the selector control options In the c...: