Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

FAQs

What is the part number for the AL SFIC spacers?

Resolution: The part number for one spacer is D500-000.:

Will Schlage locks with a BD suffix accept a BEST SFIC core?

Resolution: The Schlage B and BD cylinder suffixes designate less small format interchangeable core (SFIC) cylinder prep for the lock. Any SFIC, 6-pin or 7-pin, can be inserted into th...:

What is the old 7910-931 RF receiver frequency that LCN used for its ADA products?

Resolution: The older frequency was 303.875 MHz, and was for the 7910 Series "Linear" products (sold prior to 2009). The single channel receiver had a part number of 7910-931. See here f...:

Which conventional cylinder cam is used with an Adams Rite MS series lock?

Resolution: L583-446; Schlage Adams Rite MS modular cam used on 1 1/8", 1 3/8" and 1 5/8" cylinders L583-447; Schlage Adams Rite MS modular cam used on 1 1/4", 1 1/2" and 1 3/4" cylinders B502-944; Sch...:

What is the part number for the 99 hex dogging key?

Resolution: Part Number 090085 is a package of 10 of the 227 dogging keys.:

Is the "pigtail" on the Von Duprin EL cable required for the EL to work properly?

Resolution: The pigtail with the Molex connector on the EL cable provides a quick connector to the EL device and makes the connections easier. It is highly recommended to use this cable assembly. Without it yo...:

How is the 4582 strike handed?

Resolution: The 4582 is handed because the latch pocket is not centered on strike plate. the 4582 can't be handed in the field. See attached information: 4582 Handing:

What is a Von Duprin 893P strike?

Resolution: The 893P is not a strike, it is the UL label on a 6000 series strike. This label will not describe the strike you have.:

Would the 900-4R option board control EL devices in a PS914?

Resolution: The 900-4R is used with PS900 series power supplies and has four independent outputs and inputs with no time delay. You can use any of these outputs with electrified hardware including EL devices a...:

When would you use the 900-4R option board in a 900 series power supply?

Resolution: The 900-4R is used with PS900 series power supplies. The 900-4R has four independent outputs and inputs with no time delay. You can use any of these outputs with electrified hardware including EL...: