Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

FAQs

Resolution: Cams for other applications may be specified with no additional charge, see pricebook.:

Will the Von Duprin 9975 EO exit only device accept any Von Duprin trim?

Resolution: Von Duprin 98/9975EO exit device will accept any appropriate trims such as the 996L-M, 990NL-M or 990TP-M.:

How do you adjust the hold open time on a 4600 (4630/4640) operator?

Resolution: To adjust the hold open time on a 4600 (4630/4640) operator:Press the "MODE" button on the control box 1 time to get into programming mode. The "YELLOW" mode indicator LED next to "HOLD OPEN TIME" ...:

Which direction does the Von Duprin CX 10 wire harness plug into the board?

Resolution: Chexit devices shipped after 8-24-2015 with motor driven has a twelve wire connector wires and is keyed and can only plugged into the Chexit module in one direction. Chexit d...:

What parts of the device and trim for the 98/99 are 643E finish?

Resolution: Device: Pushbar end caps, pushbar trim and center case cover. Trim: Lever assembly, trim plate assembly (trim plate and bushing sleeve).Bronze Finish Comparison:

Does the Von Duprin 99 NL OP include the 110 cylinder assembly?

Resolution: When you order the 98/99NL-OP the 110 cylinder assembly will be provided.:

What is the part number for a Schlage FSIC lever on an ND lock?

Resolution: On ND Series locks manufactuered prior to January 30, 2017:The ND FSIC lever part number was 03-032. :

Will the 99 device work with a Simplex trim?

Resolution: This configuration has never been tested.:

What is the size of the Levon lever in the A series?

Resolution: The door face to lever tip distance is 1 3/8":

What is the part number for the L9040 and L9440 emergency release without an indicator?

Resolution: WITHOUT INDICATOR - use an emergency tool available in the price book L583-691, this ships standard with L9040/L9440 as of December 2019 and replaced the L583-233 (L583-2...: