Allegion
Terms of Use
Privacy Policy
Frequently Asked Questions
Ask your question
Entering your question as a complete sentence will provide more accurate results than keywords or phrases.
User questions
FAQs
Category List
FAQs
«
213
214
215
216
217
»
Question
Answer
GT-400 Power Battery Requirements (2010)
Resolution:
GT-400 Power Battery Requirements (2010):
What is the standard FSIC mortise housing with a straight cam?
Resolution:
20-059 is the standard straight cam FSIC housing only used with Von Duprin, Monarch, and other straight cam applications. 30-032 is the straight cam FSIC housing only for the outside of the Schl...:
Does the S series offer a 3 1/2" rose?
Resolution:
The S and S200 rose is 2-9/16" in diameter only.:
Will the PS861 power an EL99?
Resolution:
The PS861 will not power an EL device. The high 16Amp current of the EL requires the PS914-2RS, PS914-4RL or the older PS873-2 power supply to operate.:
Can the old style 3327 top latches and rods still be purchased?
Resolution:
The old style Von Duprin 3327 top latch and rod is longer available. The part number for old 3327 top latch was 105339.:
Does Von Duprin have an exit device that also uses a deadbolt?
Resolution:
Von Duprin doesn't offer an exit device that provides deadbolt.:
Can you put a best small format core in a AL25?
Resolution:
The AL25 is a non-keyed lockset, Blank plate outside, inside lever always unlocked. Does not require a cylinder or interchangeable core to operate. :
Do any of the 6000 strikes meet a Wind Storm rating?
Resolution:
None of our 6000 strikes meet Wind Storm rating.:
Why are my 1690 device bottom rod are dragging?
Resolution:
Required top and bottom rod adjustment. Top rod possibly is adjusted too short and not lifting the rod far enough to engage the latch retention which would cause bottom rod to drag floor ...:
What LCN closers are available in a tri-pack mounting?
Resolution:
The 4040XP, 1260/1261, 1460/1461, 4030/4031 closers have the tri-pack mounting option when ordered with an Rw/PA or Hw/PA designation.:
«
213
214
215
216
217
»