Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

FAQs

What are the Falcon T lock electrical requirements?

Resolution: Prior to June 2011 the T lock only supported 24V and the electrical requirements were as follows: 0.185 amp @ 24VDC Wire Gage 22 AWG See wiring diagram here - (Previous 2 wire versi...:

What is the BE367?

Resolution: Basic programming instructions available here.:

ND keycam part numbers.

Resolution: See here for standard ND Keycam part numbers and what functions they belong to. See here for special ND Keycam part numbers and what functions they belong to. ...:

When was the KS padlocks introduced?

Resolution: The KS series was introduced in 2005.:

I have an old PL series padlock what is the KS replacement?

Resolution: :

What replaces the Von Duprin SS900 key switch

Resolution: Nearest functional equivalent is the 653 x L2 SES keyswitch:

Where can I find a KS or KC padlock service manual?

Resolution: Service manual can be found here.CAUTION: Service Manual is discontinued and may contain parts no longer available. :

Does the ND lock have an RX option?

Resolution: The ND lock is available with an RX option: When ordering a complete ND lock specify RX when the request to exit (RX) switch is required. The ND80EL, ND80EU, ND96EL, ND96EU, ND12EL, ND12E...:

How is the split key construction insert retained in a cylinder?

Resolution: With split key construction keying there are two ways the construction insert is retained in the cylinder so that it won't fall out the back end of the plug, see Figure 1. The ...:

What cylinders are available with UL437?

Resolution: UL437 is testing requirement that cylinders pass both a timed cylinder pick test, a forceful core/cylinder pull test as well as a destructive entry test. We have various c...: