Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

FAQs

what is the wiring to by pass the electronics board for to 390+ magnetic lock

Resolution: 12VDC - red/black = positive blue/white = negative 24VDC - red = positivewhite = negative Connect blue/black:

Can you power a electric strike from the 7900 control boxes?

Resolution: The power supply output in the 7900 series control box is a 12VDC output, rated at (1/4A) 0.250A. It cannot be used to power a strike or maglock. You need to have a separate power supply for the st...:

Why would a Senior Swing door slam shut?

Resolution: The Senior Swing has a built in circuit that controls closing speed through the motor. If the door is slamming, there must be a broken gear in the gearbox and the gearbox will need to be replaced.:

What is the minimum stile for a 1790?

Resolution: Minimum stile for the 1790 device is 1-3/4" per Falcon-D Catalog.:

25 pin to 9 pin connector pinouts for DC-102

Resolution: 25 to 9 pin Serial Adapter Cable Pinout DB-9S DB-25P DCD 1------------------- 8 RXD 2------------------- 3 TXD 3------------------- 2 DTR 4------------------- 20 GND 5------------------- 7 ...:

F-Series (Handkey and HandPunch) battery back-up installation

Resolution: F-Series (Handkey and HandPunch) battery back-up installation:

E-Series (ID3D-RW, HP-RW) Field Installation of Outdoor Door Assembly

Resolution: E-Series (ID3D-RW, HP-RW) Field Installation of Outdoor Door Assembly:

E-Series (ID3D-RW, HP-RW) 24VAC Heater Transformer Installation or heated platen

Resolution: E-Series (ID3D-RW, HP-RW) 24VAC Heater Transformer Installation:

F-Series KP-201 installation

Resolution: F-Series KP-201 installation:

HandPunch or HandKey II F-Series Top Panel replacement

Resolution: F-Series Top Panel replacement: