Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

FAQs

Will the 24/25 device clear a glass bead?

Resolution: The 24/25 device sits flush against door surface so the device would require shim kits. See Parts Manual, under 24/25 Series miscellaneous kits and parts, Glass bead kit (GBK), shim kits....:

What is the part number for the driver for a FSIC on an S lock?

Resolution: The part number is S605-242.:

Are EPT preps available on the Paladin Series door?

Resolution: EPT power transfer preparations are available on the Paladin PW14-Series door and FP14-Series frame. Electrified hinges are available on the Paladin PW14-Series door&...:

Can you order an AL series lock lead lined?

Resolution: The AL lock is not available lead lined. :

Will the 80-033 fit in a AL lock?

Resolution: The 80-033 will fit in an AL lock, but will be supplied uncombinated. Pins and springs are not supplied.:

Does Von Duprin make a cover plate that would fit over a 6211 electric strike prep in the frame?

Resolution: Von Duprin doesn't offer a cover plate to fit over the 6000 series electric strike prep in the frame.:

What replaced the PCB 871-2?

Resolution: The 900-2RS for use in the new PS914 Power Supply.:

What size wire and run is recommended when using a PS914-2RS?

Resolution: For Product Shipped Prior to August 2012 using the old (black) potted module:a. 0-100 ft 14 gauge wireb. 0-200 ft 12 gauge wire&nbs...:

How to disable delayed egress mode on the M490 DE/DEP

Resolution: M490DE -- suppress delay function - Place a jumper across the Fire and AUX inputsPlace dip switch SW2 - 4( Relock on FA clear or power up.) on and SW2-8 off (Plunger button d...:

Does the Von Duprin ALK require the RX switch to operate?

Resolution: The RX switch is required to activate the ALK. The RX switch monitors the pushbar and will signal the ALK to go into alarm when the pushbar is depressed. The RX switch also allows free in...: