Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

FAQs

What are the dimensions of the SC70 footprint

Resolution: The measurements from center line to centerline of the mounting holes are 2-3/8" x 6-3/4".:

Is the coin cell battery used on the AD300 or AD400 locks?

Resolution: The coin cell is not used in an on-line lock. The AD200/AD250 locks only use the coin cell battery to mainatain the real time clock during AA battery changes. The WRI400, AD300 and AD400 &nbs...:

For the Offline locks AD-200, AD-250 and CO-200 what is the purpose of the coin cell.

Resolution: The coin cell maintains the real time clock on offline locks. This allow for accurate execution of timed functions. If all AA battery and Coin cell battery power is lost, when AD-200/AD-250/C...:

Should terminals SC and I1 have constant 24VDC on Von Duprin PS873-2 power supply?

Resolution: Yes, SC and I1 measure 24VDC.:

Does Insulclad make any difference on how a 5547 is installed?

Resolution: A special 5547 blind fastener mounting package for the device must be used when mounted a 5547 on an Insulclad door. Supplied are special length sex bolt anchors, special...:

What could cause PS873 power supply not to provide 24VDC output?

Resolution: Check to see if fuse is good, if bad replace with 4amp slow blow fuse. If Fire Alarm board is used confirm that the Fire Alarm is closed across the board, try using a jumper wire to ru...:

How long will it take for a coin cell to deplete.

Resolution: The coin cell can last up to 30 days when the AA batteries are not present or are depleted. If the AA batteries are installed and are above 3.7 VDC (or so), the coin cell is not being used at all.:

What is the part number for the end cap and bracket for the 22 device?

Resolution: End cap without end cap bracket is 968601. End cap kit with bracket is 900981 End cap bracket is 971795-89:

Can the ED electric dogging option still be ordered for the 24/25 series exit device?

Resolution: The ED (electric dogging) option was discontinued for the 24/25 devices on 4/27/2011. Internal Product Bulletin for IR employees concerning the Discontinued ED option att...:

What is part # 710164-00?

Resolution: That is the old factory internal part number for a sr swing control box. The part number (for ordering) is 9540-3462 or series # -3462. This 710164-00 was listed on the label on th...: